adsorption tube
英
美
吸附管
双语例句
- This is because process execution now needs to be coordinated across the bus, which operates at half the clock frequency of the chip.
这是因为进程执行现在需要跨总线协调，以一半的芯片时钟频率进行处理。 - As a novel modular cooling apparatus, adsorption cooling tube and its application study is an important side of solid adsorption refrigeration research field.
其中，作为一种新型单元式微型化的制冷器件，固体吸附式冷管及其应用研究是吸附制冷研究领域中的一个重要方面。 - GC Determination of Acetic Acid in Ambient Air and in Waste Gas After Enrichment with Silica Gel Adsorption Tube
硅胶管富集-气相色谱法测定环境空气和废气中乙酸 - A novel solid adsorption cooling tube driven by waste heat is proposed in the paper.
回热器是脉管制冷机的关键部件之一，其效率对脉管制冷机性能有很大影响。 - In two imported directly by precision inner diameter glass tube adsorption column ( standard wall glass tube adsorption column is no longer supported), more user-friendly.
直接采用两支进口精密内径玻璃管吸附柱（标准壁玻璃管吸附柱不再配），更方便用户使用。 - Performance Analysis on Solar Adsorption Refrigeration Using Vacuum Tube Adsorber
采用真空管太阳能吸附集热器的制冷系统性能分析 - Refrigerating Identity Simulation On A Novel Adsorption Cooling Tube
新型吸附式制冷管的制冷特性数值模拟 - Refrigerating characteristics of solid adsorption cooling tube
固体吸附式冷管的制冷性能 - The simulations on the tube and the primary experiments on the adsorber combined by the unit tube s indicate that the heat and mass transfer performance of the adsorption unit tube is very good.
通过数值计算和由吸附单元管组合而成的吸附床的性能初步试验，证明该结构形式的吸附单元管具有优良的传热传质性能。 - Utilizing the Linear Driving Force ( LDF) model, a dynamic heat and mass transfer model for the pressure swing adsorption/ desorption characteristics of the waste-heat-powered adsorption cooling tube module with 16 mm diameter and 1020 mm length was established.
针对余热驱动吸附式冷管单元（直径16mm，总长1020mm）制冷循环过程的变压吸/脱附特性，采用线性驱动力（LDF）模型，建立了动态的传热传质数学模型。 - Refrigerating Characteristics of the Adsorption Cooling Tube With Different refrigerant charging
制冷剂充灌量对吸附式制冷管的制冷特性的影响 - Experimental investigation of CaCl_2-NH_3 adsorption refrigeration unit tube
氯化钙-氨吸附制冷单元管性能实验分析 - The refrigerating identity of an adsorption cooling tube applied in mobile machinery shop air conditioning is researched in this paper.
本文研究了一种应用于工程车司机驾驶室的新型制冷管的制冷性能。 - A novel adsorption cooling tube is designed and manufactured, using CaCl_2-NH_3 as the adsorption working pairs.
在针对余热吸附式冷管前期研究成果的基础上，以CaCl2-NH3为吸附工质对设计制作了一种新颖的吸附式冷管。 - Numerical Simulation and Experimental Study of the Adsorption Cooling of Solar Cooling Tube in Nighttime
太阳能冷管晚间吸附制冷的数值模拟与实验 - Design and Experiment on a Novel Adsorption Cooling Tube
一种新颖吸附制冷管的设计及性能实验研究 - Numerical Simulation and Analysis of the Heat and Mass Transfer in the Adsorbent Bed of Single Tube Adsorption Refrigeration Unit Tube
吸附式制冷单管吸附床传热传质的数值模拟及分析 - In present experiments, the adsorption of JP-10 in shock tube was taken into account, and JP-10 concentration was exactly determined.
本论文考虑了JP-10在激波管壁的吸附特性，重点解决了气相浓度的确定问题。 - Study on the Adsorption of Disposable Transfusion Connective Tube and Infusion Needle for Single Use only to Nitroglycerin
一次性输液连接管和输液针对硝酸甘油的吸附作用研究 - A single solid adsorption refrigeration tube driven by waste heat which has no throttling or moving part comprises a generator and a receiver/ condenser/ evaporator.
余热固体吸附式冷管采用沸石分子筛-水为工质对，由吸附器、冷凝器/蒸发器（合一）组成一个独立的制冷单元，结构简单，无节流装置和运动部件。 - Because of the features of its configuration, the cycle characteristics of the adsorption cooling tube is different from the basic adsorption refrigeration cycle.
由于冷管结构上的特点，其循环特性跟一般的基本型吸附式制冷循环有所不同。 - Through simulated sampling of the ambient air indoors with adsorption tube filled with Tenax TA adsorbent and activated carbon respectively, adsorptive capacity of benzene in air from Tenax TA adsorbent or activated carbon could be found out.
分别采用吸附剂为Tenax-TA和活性炭的吸附管模拟现场采集室内环境空气，了解Tenax-TA和活性炭对空气中苯的吸附性能。 - Study on Cycle Characteristics of a Solid Adsorption Cooling Tube Driven by Waste Heat
余热驱动吸附式冷管的循环特性研究 - OBJECTIVE: To study the adsorption of disposable transfusion connective tube and infusion needle for single use only to nitroglycerin in intravenous injection via minipump.
目的：研究微泵维持静脉注射时一次性输液连接管和输液针对硝酸甘油的吸附作用。 - Heat and Mass Transfer Model on the Solid Adsorption Refrigerating Unit Tube Driven by Exhausted Gas
固体吸附式制冷的热力计算烟气余热吸附式制冷单管的传热传质模型 - In shock tube measurements of the JP-10 ignition delay time, the uncertainty of the gas concentration due to the adsorption of JP-10 in shock tube is one of the main reasons resulting in large scatter of measurement data.
在JP-10点火延时的激波管实验中，JP-10在激波管壁的吸附导致气相浓度的不确定是测量结果分散的主要原因之一。 - Experimental studies of the adsorption in shock tube measurements of the JP-10 ignition delay time
激波管中测量JP-10点火延时的吸附问题研究 - Running characteristics of adsorption cooling tube air-conditioner powered by waste heat of Engineering trucks
工程机械余热驱动冷管型吸附空调的运行特性 - Determination of Trace Phenol Compounds Using Gas Chromatography-Mass Spectrometry Coupled with Tenax Adsorption Tube for Enrichment of Air Samples
Tenax采样管富集气相色谱-质谱法测定空气中的痕量酚类化合物 - In addition, the adsorption of hydrogen in the tube can affect the electronic and optical properties of the nanotubes.
另外，表面H吸附将影响GaN纳米管的电子结构和光吸收性质。